Ford Maverick Forum banner

2022 Ford Maverick spotted in bare metal

7150 Views 8 Replies 5 Participants Last post by  Dano0726
5
Here's what the Maverick's design will look like thanks to these bare metal photos.


127
128
129
130
131
See less See more
  • Like
Reactions: 1
1 - 9 of 9 Posts
It has my blessings so far. It actually looks like a truck at this point.
  • Like
Reactions: 1
YES!!!

Guesses/estimates on the length of that bed???
YES!!!
Guesses/estimates on the length of that bed???
Looks 5' to me.
Also looks like it will have the usual plastic caps for the bed sides instead of stake holes. Could be wrong, but it also looks like it will have a lot of plastic on the back corner cab area, hopefully that doesn't mean it will have that weird triangle arch like on an avalanche. With the back of the cab at 90 degrees, it wouldn't be too hard for aftermarket to come up with a topper that meets up with the top of the cab.
Looks good though!
If we added the tailgate (laying flat), will we be over 6 foot? I can't remember what size (18"/24"/30"?) a tailgate measurement?
Very nice job. I hope it will be offered with a normally aspirated engine, and manual gearbox
  • Like
Reactions: 1
YES!!!

Guesses/estimates on the length of that bed???
I would guess 4' by 4' just by looking at it.
This seems to look very adequate (for my needs)...

Now -- let's talk about price of these puppies
Also, it appears the front/rear will carry over from the Bronco Sport -- don't know which grille will be in the front, but the body panels/lines seem to copy the Bronco Sport...
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top