Ford Maverick Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
75 Posts
Drive fast and blow the fumes away so you don't have a combustible mixture.

Really, you could give the connectors a good push/pull and possibly rotate back and forth slightly them a bit.... IF the seeming wet spots are where the connectors push onto hard lines or other fittings. It's likely what a tech would do, unless the connectors are bad, in which case they will have to order replacements... which may/may not be in stock. If the Escape 2.0 fuel lines work, so much the better and more likely they will have any needed parts.
 
1 - 1 of 1 Posts
Top