Ford Maverick Forum banner

Question about building a bare bones Build

2184 Views 3 Replies 3 Participants Last post by  Probity
I'm looking for just a bare bones hybird build with a bed liner.

The only other feature I want is parking sensors for the front and back.

Does this require Sync 3 or Pilot 360?
1 - 4 of 4 Posts
You need a Lariat w/ Luxury Pack for rear parking sensors. No front parking sensors available on any trim.

*Rear park sensors are technically optionable fleet-only on lower trims.
You need a Lariat w/ Luxury Pack for rear parking sensors. No front parking sensors available on any trim.

*Rear park sensors are technically optionable fleet-only on lower trims.
Oh ok, that's a bummer.
You can do aftermarket bedliner (Line-X, etc). If you add the trailer hitch option you can do "relatively" cheap aftermarket sound-only hitch receiver rear sensors that don't require wire splicing or bumper drilling (something like this - Amazon.com: Echomaster 00-03000 Hitchscan Wireless Trailer Hitch Detection System: Automotive and with added benefit you'll now have a hitch receiver for that bike rack or cargo carrier or small trailer or ...). There are aftermarket front sensors but not aware of any minimum effort installs.
  • Like
Reactions: 1
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top