Can't comment on a 2024 but my 2022 was supposed to have the pigtails to connect to the rear bed wiring. It didn't so I bought them Bed wiring pigtails . You might check around your interior to see if they are hidden somewhere. Mine didn't have the small funnel either!. Keep in mind these power sources are only rated at 15 amp

Then I added a plate to connect the the pigtail to an outlet. There's many web ideas on adding power outlets to the side plated.

 

How are you going to use that pigtail connection?

 

I used them for led ribbon with switch in truck bed. Very bright

 

I have a 2023; my dealer told me their are two wires for 12vdc on each side of the
bed, covers for the spaces, close to the tailgate. The wires probably fell down,
dealer told me that happens during shipments. I was able to find the wires and I
installed a receptacle and connected the wires, used a cigarette type receptacle.
Works fine, use it for an electric cooler that works on 120vac or 12vdc. Only
installed one receptacle, on drivers side.

 

I have a 2023; my dealer told me their are two wires for 12vdc on each side of the
bed, covers for the spaces, close to the tailgate. The wires probably fell down,
dealer told me that happens during shipments. I was able to find the wires and I
installed a receptacle and connected the wires, used a cigarette type receptacle.
Works fine, use it for an electric cooler that works on 120vac or 12vdc. Only
installed one receptacle, on drivers side.

That is exactly what I would like to use it for….to plug in my fridge in the back.

 

The 12v in the bed will only work while the truck is "running" as to avoid a parasitic draw situation. If u want a switch u can turn VidMate on and off at will u will have to run a new "live" wire to the bed.

 

It may have come lose and fallen down inside you may beagle see it from under truck by wheel wells

 

Did you make or buy the plates, good idea..